Illuminating Coconut Cream Cleanser

Released by Coast Southwest, Inc.

Author Image

By: TOM BRANNA

Editor

Illuminating Coconut Cream Cleanser
Ingredients
%

Phase A

  • Deionized water
  • 55.33
  • Endiquest GLDA (Coast Southwest) (Tetrasodium glutamate diacetate)
  • 0.15
  • Endinol Mild B-SF65 (Coast Southwest, Inc.) (Sodium cocoyl isethionate (and) cocamidopropyl hydroxysultaine (and) lauryl glucoside (and) cocamidopropylamine oxide (and) caprylyl/capryl glucoside)
  • 24.00

Phase B

  • Rosehip oil (Coast Southwest, International Cosmetic Science Centre) (Rosa canina fruit oil)
  • 3.00
  • Coconut Oil (Coast Southwest, International Cosmetic Science Centre) (Cocos nucifera (coconut) oil)
  • 4.00
  • Stearic Acid (Coast Southwest.) (Stearic acid)
  • 4.00
  • Endimulse EGMS (Coast Southwest, Inc.) (Glycol stearate)
  • 3.00
  • Myristic acid (Coast Southwest.) (Myristic acid)
  • 0.80
  • Palmitic acid (Coast Southwest) (Palmitic acid)
  • 1.50

Phase C

  • NaOH 40% w/w solution (Sodium hydroxide)
  • 0.80

Phase D

  • SharoSENSE Plus 181 (Coast Southwest, Sharon-Lab.)(Maltol (and) polyquaternium-80)
  • 0.70

Phase E

  • GlyAcid 70 HP (Coast Southwest, CrossChem) (Glycolic acid)
  • 1.70
  • NaOH 40% w/w Solution (Sodium hydroxide)
  • 1.02

Procedure

Phase A–Add phase A ingredients in formula order to the main vessel with shear mixing and begin heating to 158-167˚F (70˚C-75˚C). Mix until fully uniform. Phase B–In a separate vessel, add phase B ingredients in formula order with propeller mixing and begin heating to 158˚F to 167˚F (70˚-75˚C). Once at desired temperature and fully uniform, add phase B to phase A under shear mixing. Mix until fully uniform and dispersed. Phase C–Add phase C to phase AB with shear mixing. Begin cool down. Phase D–When main vessel is at 122-140˚F (50-60˚C), add phase D with shear mixing. Mix until fully dispersed and uniform. Phase E–In a separate vessel, combine phase E ingredients with continuous mixing. Note: Reaction is exothermic. Allow time for neutralization above pH 4.2. Once main vessel is below 104˚F (40˚C), add phase E with shear mixing. Transfer to final container when batch is fully uniform and at room temperature.

Properties

pH—6.0 to 6.5; Viscosity—spindle 04 @ 5.0 rpm = 9,000 to 13,000 cst.

More Information

Coast Southwest, Inc. Email: [email protected] Website: www.coastsouthwest.com